HEAT INDUSTRY T4000
Inductor 3,7 KW is a machine for heating ferrous materials with good power and efficiency.
The heat is created directly within the metal to a depth of 5 mm. It brings an area of 40 x 40 x 16 mm to red-hot in 15 seconds.
Lack of fire allows the operator to work close to cables, pipes or other heat-sensitive parts.
Oxygen flames lead the metal surface temperature to 3,000 degrees with inevitable change in the characteristics of the metal, induction heating instead generates the heat only in the applied point.
The metal can quickly lead to very high temperatures even if 5/600 degrees are sufficient to perform the most common operations of straightening, bending, substitutions of pivots, bearings, brackets, bolts etc.
Equipped with ISOLATION TRANSFORMER for a complete operator safety even under the most unfavorable and unpredictable conditions.
Practical and useful applications of the inductor
- Removal Absorber
- Application on brake pipes
- Removing suspension
- Straightening or bending springs
- Straightening rigid axles
- Chassis straightening
- Straightening drive shafts
- Straightening rods
- Removing cast posts
- Preheating for welding
- Unlock bolts<
- Unlock wheel bolts
- Unlock silencers
- Unlocking the Lambda sensor
- Unlock spherical joints
- Removing paints
- Straightening sheets
- Strenghtening steels
3,7 KwNominal tension 230 V Frequency 50/60 Hz Heater frequency 20-26 kHz Insulation class l Cooling to liquid 20 Lt Network cable 8 m Induction cable 8 m Weight 65 Kg Height 840 mm Width 420 mm Depth 420 mm